Maxima
Decorative wax for facade stuccos coating Cera Frontale
Specification
Decorative wax CeraFrontale allows additional protection against damages, moisture effect, weather effect and gives the decorative surfaces additional decorative effect. It creates vapor permeable and water repellent coating.
Sphere of application
It is intended for protective applying on decorative products "Marmorino", "Art Beton", "Travertino" TM Maxima and other mineral surfaces. For interior and exterior works.
Tinting
The product is tinted manually with pigment concentrate "Farbex Color", other tinting pastes or with a tinting machine according to NCS color rate and others.
It is recommended to use the product of one batch to avoid differences in color. Mix the product of different batches before use.
Slight deviations in technical properties are allowed after tinting.
Technical data
| Thinner | - |
| Application rate | - |
| Drying period (20 °С, 60% RH) | - |
| Solids content (DSTU ISO 3251) | - |
| Density (DSTU ISO 2811-1) | - |
| Resistance to static effect of water | - |
| Application | - |
| Warranty period | - |
Color
Application instruction
1. Surface preparation
The surface shall be clean, dry and hard. Decorative base surface shall be completely dry.
2. Priming
Decorative acrylic surfaces (plasters and coats) need no preliminary undercoating.
3. Applying
Mix the wax thoroughly before use.
Add chosen pigment to the wax and mix it thoroughly before application. Apply the wax with a roller, a brush or a spatula on the base surface. After that soak the wax in with a cloth or a sponge till the effect you wish. Treat the surface with a plastic trowel to emphasize the structure.
Perform the works at the temperature of air and surface from +10°С till + 30°С and air humidity less then 80%.
4. Tool cleaning
Wash the tools with water after the work is finished. Don't let it dry. Rests of rejected product can be removed mechanically.