Specification
Silky-matte. Allows you to get a coating that is tactilely similar to silk, which can change shades depending on the lighting and angle of incidence of light. Vapor-permeable. Forms a durable coating that is resistant to washing.
Sphere of application
For interior work. Intended for high-quality decoration of walls and ceilings made of mineral bases (cement and cement-lime plaster, putty, gypsum, brick, concrete) in rooms with moderate humidity.
Tinting
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes, or with a coloring machine acc. to NCS color range and others.
It is recommended to use products from one batch to avoid the differences in shades of color.
Modifications in the technical properties of products are allowed after tinting.
Content
Technical data
| Thinner | Water. It is allowed to dilute it max. 10% of the total weight of the product. |
| Consumption standard of 1 layer | 110-160 g/m2, depending on the technique of application |
| Drying period (20 °С, 60% RH) | 4 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days! |
| Application | Apply with a spatula and trowel or roller. |
| Density (DSTU ISO 2811-1) | ≈ 1,15 g/сm3 |
| Particle size | max 50 mkm |
| Solids content (DSTU ISO 3251) | 36±2 % |
| Warranty period | 24 months, (at the temperature from +5 °С till +35 °С) |
| Packaging | 1 kg, 3kg, 5 kg, 10 kg |
Application instruction
1. Surface preparation
The surface must be strong, dry, and free of dust, loose coatings, chalk, limescale, efflorescence, grease, and other contaminants.
2. Priming
It is recommended to treat the surface with a deep penetration primer TM «Maxima» or TM «Farbex». On the prepared surface, apply latex primer paint «Deco Base» TM «Maxima Decor», which should be tinted in a color close to the material.
3. Applying
Before use, mix the material thoroughly, if necessary, dilute it with water. Apply the first layer of material, evenly distributing it over the surface. After the first layer has dried, apply the second, a thin even layer, simultaneously creating a chaotic pattern on it with the selected tool. "Velvetto Matt" can be applied using various techniques to achieve different effects.
The drying time for a single coat is 4 hours. Do not apply the next coat until at least 24 hours have passed. Drying time increases with lower temperatures, higher relative humidity, and increased plaster application rate (layer thickness). After application, the surface must not be exposed to moisture or mechanical stress for 24 hours. The surface is fully dry after 28 days.
Work should be carried out at air and working surface temperatures from + 10 °C to + 30 °C and air humidity not more than 80%. Do not mix with other materials and organic solvents.
4. Tool cleaning
Clean tools with water after application. Do not let them dry. The dry product shall be removed from the tools in a mechanical way.
Flow calculator
Consumption standard of 1 layer
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.