Specification
*
Sphere of application
*
Tinting
The paint is tinted manually with a pigment concentrate Farbex Color, other water-based pastes or with the help of a color machine.
It is intended for application as the only coating of white color or tinting in pastel, light shades and colors of medium saturation.
It is recommended to use the paint of one batch for application to avoid differences in shades of color. In the case of using the paint of different batches, it is necessary to mix them.
If check the correspondence of tinting to the chosen color, make a trial coating of a small area of the surface.
Diluting of colored paint is not recommended for the finishing coat.
Content
Technical data
| Thinner | Water. It is allowed to dilute it max. 10% of the total weight of the product. |
| Application rate | 110-150 g/m2, depending on the technique of application. |
| Drying period (20 °С, 60% RH) | 1 hour. Drying period increases if the temperature gets down and relative air humidity icreases. |
| Application | Apply with a roller, a brush or a spraying gun |
| Density (DSTU ISO 2811-1) | ≈ 1,55 g/сm3 |
| Particle size | maximum 30 micron |
| Solids content (DSTU ISO 3251) | min 55% |
| Warranty period | 36 months, (at the temperature from +5 °С till +35 °С) |
Gloss
Application instruction
*
1. Surface preparation
An uncoated surface:
- clean of dust, grease and other dirt.
- defected surfaces shall be corrected with plaster. polish a fully dry surface and remove abrasive dust from the surface after that. The surface in poor aired wet premises shall be treated with antiseptic for mineral surfaces TM "Farbex".
- treat the surface with a deep penetration primer TM "Maxima" or TM "Farbex" for better adhesion, hardening of the base surface and leveling of the adhesive property.
Previously coated surface:
- clean the surface thoroughly from loose coats, chalk and lime chalk coats and other dirt.
- treat it further as an uncoat surface.
2. Applying
Stir the primer paint carefully before use.
Apply the primer paint at the temperature of air and the surface from +10°С to +35°С and relative air humidity less than 80%.
Apply the primer paint with a brush, a roller or a spraying gun in 1-2 coats.
3. Tool cleaning
Clean tools with water after application. Do not let them dry. Dry product shall be removed from the tools in mechanical way.