Farbex
Putty for parquet, wooden and mineral surfaces
Specification
It is elastic. It dries quickly. It has high adhesion to wooden and mineral surfaces.
Sphere of application
The putty is intended to correct defects and insignificant damages on the surface of various kinds of wood, parquet boards, wood chipboard, MDF and mineral surfaces. It can be used for interior and exterior works.
Tinting
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes or with a coloring machine acc. to NCS color range and others.
After tinting the product can slightly deviate in technical characteristics.
Content
Technical data
| Consumption standard of 1 layer | 1,8 kg/m2 with a layer sickness of 1 mm |
| Thinner | Water. It can be deluted 5 % of the total weight maximum |
| Application | Apply with a stainless spatula. |
| Drying period (23 °С, 50% RH) | about 2-3 hours, if coat thickness less than 2 mm |
| Solids content (DSTU ISO 3251) |
73±2 % |
| Density (DSTU ISO 2811-1) | 1.79 – 1.81 g/cm3 |
| Particle size | Max. 100 µm, (fine-grained, S1, SSU EN 1062-1) |
| Resistance to washing | Cat. С, from 50 to 150 µm, SSU EN 16566 |
| Gloss (DSTU ISO 2813) | Less than 5, Class G3, matt |
| Water permeability (DSTU EN 1062-3) | less than 2,5 kg/(m2*ч0,5), class W1, high |
| Vapor permeability (EN ISO 7783-2) | more than 500 g/(m2*24 hours), class V1, high |
| Marking acc. to the DSTU EN 16566 | G3|S1|V1|W1|A0|C0|RC |
| Non-volatile matter by volume (DSTU ISO 3233) |
51,5±2 % |
| VOC content (ISO 11890) | ≈ 40 g/l. |
| Warranty period | 18 months |
| Packaging | 0,35 kg, 0,7 kg, 1,5 kg |
Color
Application instruction
-
1. Surface preparation
Clean the surface from fragile coats, dust, oil, grease and other dirt.
It is necessary to use Antiseptic for wooden or mineral surfaces TM Farbex, depending on the type of the surface for protection against mould and fungi.
It is necessary to use deep-penetrating primer TM Farbex to make absorbing property of the surface even and improve the adhesive property.
2. Priming
-
3. Applying
Stir thoroughly the putty before use and dilute with water if it's required. The works shall be performed at the temperature of air and the surface from +10 °С till +35 °С, and relative air humidity less than 80%. Apply the putty with a stainless spatula. Big hallows are recommended to be plastered in several coats.
Polish and undercoat the surface before applying paint. Treat wooden surfaces with acrylic or alkyd wood protective primer TM Maxima depending on the finishing paint product. Use water-based primer TM Farbex for mineral surfaces following its directions.
4. Tool cleaning
Clean tools with water after application. Do not let them dry.
Tips
What Coating is Suitable for Interior Wooden Doors and MDF
Wooden interior doors have always been and remain popular due to the natural beauty of timber and the exploitative traits of this material. It has good sound and heat insulation. Wood is reliable, practical and durable. However, due to the …
Flow calculator
Consumption standard of 1 layer
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.