Specification
- it сreates the effect of a «wet» stone
- it creates hard film, resistant to weather effect, water, UV radiation, detergents, industrial and automotive oils.
- it provides water repellent properties to the surface
Sphere of application
It is intended for decorative and protective coating of different mineral surfaces such as natural and artificial stones, bricks, concrete, decorative border etc.
Content
Technical data
| Consumption standard of 1 layer | 50-100 ml/m2, depending on the type of surface and way of application. |
| Thinner | Universal thinner TM "Maxima". ATTENTION! Do not use white-spirit, solvent or others similar products. |
| Application | Apply with a brush, a roller or a spraying gun. The varnish shall be diluted by Universal thinner TM "Maxima" in 40-50 % quantity from the mass of varnish. |
| Drying period (23 °С, 50% RH) | 15 min. Drying period increases if the temperature is getting down and relative air humidity is getting higher. |
| Solids content (DSTU ISO 3251) |
28-33 % |
| Density (DSTU ISO 2811-1) | 0,93-0,95 g/сm3, depending on the gloss degree. |
| Gloss (DSTU ISO 2813) | matt – max. 30 GU semi-matt – 30-60 GU glossy – min. 100 GU (at 60º) |
| Hardness (DSTU ISO 1522) | ab. 80 sec, Konig pendulum. |
| Warranty period | 18 months from the date of manufacturing. |
| Packaging | 0,75 l, 2,5 l |
Gloss
Color
Application instruction
1. Surface preparation
The surface shall be dry, cleaned carefully from dust, resin and oil and other dirt before varnish application.
The surface affected by moss, mould, fungus is recommended to be cleaned in prior and be treated with Antiseptic concentrate for mineral and wooden surfaces 1:4 TM Farbex.
2. Priming
Mineral surfaces need no undercoating before varnish application.
3. Applying
Stir the varnish before application.
The varnish shall be applied in 1-2 coats.
The application of the next coat shall be provided in 15 minutes.
Besides, the application is performed at the temperature from + 10 °С till + 35 °С and relative air humidity no more than 80%. Do not apply the varnish under direct sunlight, strong wind, frost and atmospheric precipitation. After the coating is applied it shall not be affected by atmospheric precipitation and sub-zero temperatures for 24 hours.
4. Tool cleaning
Clean tools with a thinner after application. Do not let them dry. If necessary, clean them with warm water and detergents.
References
Фарбування фасаду проводилося гумовою фарбою ТМ "Farbex" двох кольорів: жовтий (RAL 1021) і коричневий (RAL …
Tips
Як самостійно пофарбувати фасад?
Хочете оновити зовнішній вигляд будинку, але не знаєте з чого почати? Користуйтесь порадами із цієї статті, щоб отримати результат, яким ви будете задоволені. Вибір фарби Робота по оновленню фасаду починається із вибору якісної фарби, яка забезпечить гарний зовнішній вигляд будинку …
Flow calculator
Consumption standard of 1 layer
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.