Marmorino stucco is allowed imitating of natural coatings with polished glossy and matt structure under marble, travertine stone, shell, concrete effect, and also different prominent structure. It creates a durable coating. The stucco hides tiny unevenness. It is figurable, easy to coat and vapor-permeable.
It is intended for decorating mineral surfaces (cement and cement-lime plasters, filler, gypsum, concrete) in living premises, offices, stores, restaurants, saloons. It is intended for interior works. Use waxes TM Maxima for advanced protection of the surface with high operation load.
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes, or with a coloring machine acc. to NCS color range and others.
It is recommended to use products from one batch to avoid the differences in shades of color.
Modifications in the technical properties of products are allowed after tinting.
|Application rate||1,2 kg/m2 -1,7 kg/m2|
|Drying period (20 °С, 60% RH)||24 hours|
|Application||-apply with a trowel or a stainless spatula;
-create the pattern with decorative tools (a spatula, a trowel, a corduroy tool or others);
-make initial levelling and hardening with a stainless trowel;
-make final hardening with a plastic float;
-polished look can be achieved by the elector-polishing tool.
|Density (DSTU ISO 2811-1)||1,7 g/сm3|
|Particle size||max 600 mkm|
|Solids content (DSTU ISO 3251)||min 77%|
|Resistance to static effect of water||min 36 hours|
|Warranty period||18 months|
Uncoated surfaces: сlean thoroughly from fragile coatings to the durable base of surface, also from dust, oil, grease, and other dirt.
Previously coated surfaces: clean the surface thoroughly from old loose coatings and from different dirties.
Insignificant defects of the mineral surface shall be corrected with finishing plaster TM Farbex and then polish.
It is recommended to treat the surface with the antiseptic solution for mineral surfaces TM Farbex for protection against fungi and mould.
Extremely absorbing surfaces shall be treated with a deep-penetrating primer TM Farbex or TM Maxima.
It is obligatory to apply a coat of Silicone paint-primer with quartz extender TM Farbex or adhesive primer with quartz filler QuartzPrimer TM Maxima. The paint or QuartzPrimer shall be tinted in the color of decorative stucco.
The difficult surfaces shall be coated by Adhensive primer "Beton-kontakt" TM Farbex in one coat ( see an area of application of Adhensive primer "Beton-kontakt" TM Farbex). Adhensive primer "Beton-kontakt" shall be tinted in the color of decorative stucco.
Stir the paint thoroughly before use.
Application in 1 layer:
The material shall be applied with a thin even layer with a stainless spatula or a trowel. After that, the pattern shall be created with the spatula, trowel, corduroy tool, or other decorative tools. The choice of tool depends on the structure that you would like to receive.
Smooth the material with a stainless trowel, making the surface hard and evenly after 10-20 minutes of humidity stabilizing.
It is necessary to continue a hardening of the surface with a plastic trowel for avoiding darkening when starting drying.
Application in 2 layers:
The first layer shall be applied thinly and evenly with a stainless spatula or a trowel. The second layer shall be applied thinly and evenly with a stainless spatula or a trowel after full drying of the first layer.
The picture shall be created with the spatula, trowel, corduroy tool, or other decorative tools. The choice of tool depends on the structure that you would like to receive.
Smooth the material with a stainless spatula, making the surface hard and evenly after 10-20 minutes of moisture stabilizing.
It is necessary to continue a hardening of the surface with a plastic trowel for avoiding darkening when it starts drying.
Perform the work at the temperature of air and surface from +10°С till + 30°С and maximal air humidity by 80%.
It is recommended to work in a group of two or three persons, as the work on a single surface shall be performed continuously.
Decorative coating Marmorino can be used as self -dependent coating.
It is recommended to use the wax Cera TM Maxima for receiving additional decorative effects indoors.
It is recommended to use the wax CeraFrontale TM Maxima for additional protection and decorative effect to the base of surfaces with high operation load.
The application method, properties, and necessary tools for waxes are in TDS of Cera and CeraFrontale TM Maxima or in the site.
Clean tools with water after application. Do not let them dry. The dry product shall be removed from the tools in a mechanical way.