Maxima
Decorative coating with a velour effect Ottocento
Specification
Decorative product Ottocento creates a coating similar to the satin fabric, silk, or velour thanks to pearl gloss and smooth structure. It can change shade depending on the light and an angle of light incidence. The product is vapor permeable.
Sphere of application
It is intended for decorating mineral surfaces (cement and cement-lime plasters, filler, brick, gypsum, concrete, foam concrete) inside of premises with intermediate moisture. The material looks more attractive when a large amount of light hits it, as well as on large areas: corridors, stairways, living rooms, halls, bedrooms, etc.
Tinting
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes, or with a coloring machine acc. to NCS color range and others.
It is recommended to use products from one batch to avoid the differences in shades of color.
Modifications in the technical properties of products are allowed after tinting.
Content
Technical data
| Thinner | Water. It is allowed to dilute it max. 10% of the total weight of the product. |
| Application rate | 0,15 -0,2 kg/m2 . depending on the technique of application and quantity of coats |
| Drying period (20 °С, 60% RH) | 24 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days! |
| Application | apply with plastic or stainless trowel, spatula and create the pattern with plastic trowel, brush or other decorative tool. |
| Density (DSTU ISO 2811-1) | 1,18 g/сm3 |
| The degree of milling (SSU ISO 1524) | max 100 mkm |
| Solids content (DSTU ISO 3251) | min 26% |
| Resistance to static effect of water | min 24 hours at the temperature 20 °С |
| Warranty period | 18 months from the date of manufacture |
Color
Application instruction
1. Surface preparation
Uncoated surfaces: сlean thoroughly from fragile coatings to the durable base of surface, also from dust, oil, grease, and other dirt.
Previously coated surfaces: clean the surface thoroughly from old loose coatings and from different dirties.
Insignificant defects of the mineral surface shall be corrected with finishing plaster TM Farbex and then polish.
It is recommended to treat the surface with the antiseptic solution for mineral surfaces TM Farbex for protection against fungi and mould.
2. Priming
Extremely absorbing surfaces shall be treated with a deep-penetrating primer TM Farbex or TM Maxima.
It is obligatory to apply a coat of adhesive primer with quartz filler QuartzPrimer TM Maxima or matt latex paint "Silk Touch 3" TM Maxima. The paint or QuartzPrimer shall be tinted in the color of decorative stucco.
3. Applying
Stir the paint thoroughly before use.
The first coat shall be applied thinly and evenly with a stainless spatula or a trowel. The second coat shall be applied thinly and evenly with a stainless spatula and trowel or plastic trowel after full drying of the previous coat.
The pattern shall be created with the spatula, trowel, brush, or other decorative tools. The choice of tool depends on the structure that you would like to receive.
Smooth the material with a stainless spatula, making the surface hard and evenly after 10-20 minutes of humidity stabilizing.
Perform the work at the temperature of air and surface from +10°С till + 30°С and maximal air humidity by 80%.
It is recommended to work in a group of two or three persons, as the work on a single surface shall be performed continuously.
4. Tool cleaning
Clean tools with water after application. Do not let them dry. The dry product shall be removed from the tools in a mechanical way.
Tips
Кольорові стелі як особливість дизайну кімнати
За останні роки прослідковується як змінюється вибір кольору для стелі і стін, і взагалі стиль інтер’єрів. Вони стають більш аутентичні та практичні. Тренд на використання екологічних і натуральних матеріалів, дозволяє втілити комфортні, зрозумілі і функціональні дизайнерські рішення. Гармонія спостерігається і …