Decorative wax Cera is intended for additional protection against damages and moisture effects. It provides gloss and additional decorative effect. It creates vapor permeable and water repellent coating.
It is intended for protective application on decorative products «Marmorino», «Art Beton», «Travertino» TM Maxima and other interior surfaces (living premises, offices, etc.)
The product is tinted manually with pigment concentrate "Farbex Color", other tinting pastes or with a tinting machine according to NCS color rate and others.
It is recommended to use the product of one batch to avoid differences in color. Mix the product of different batches before use.
Slight deviations in technical properties are allowed after tinting.
|Application rate||85 - 100 ml/m2|
|Drying period (20 °С, 60% RH)||6-12 hours|
|Resistance to static effect of water||less than 24 hours|
|Application||a roller, a spatula, a brush, a sponge|
|Density (DSTU ISO 2811-1)||1,01 g/сm3|
|Solids content (DSTU ISO 3251)||minimum 13,5%|
|Warranty period||18 months|
Acrylic decorative materials (stuccos and coatings) need not advanced undercoating.
The surface shall be clean, dry and hard. Decorative base surface shall be completely dry.
Mix the wax thoroughly before use.
Add chosen pigment to the wax and mix it thoroughly before application. Apply the wax with a roller, a brush or a spatula on the base surface. After that soak the wax in with a cloth or a sponge till the effect you wish. Treat the surface with a plastic trowel to emphasize the structure.
Perform the works at the temperature of air and surface from +10°С till + 30°С and air humidity less then 80%.
Wash the tools with water after the work is finished. Don't let it dry. Rests of rejected product can be removed mechanically.