Acrylic wood & concrete enamel Maxima

Acrylic wood & concrete enamel Maxima


Acrylic wood & concrete enamel



The enamel is semi-matt, wear-proof, and dries quickly. It has a perfect application rate. It resists to water, oils, detergents and disinfectants.

Sphere of application

It is intended for coating of wooden and mineral surfaces indoors, which are exposed by moderate mechanical load and chemical effect. I t is intended for initial coating of floors and their reparating as well as for sill plates, stairs, stair rails and for walls in living, trade and storing spaces.


It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes or with a coloring machine acc. to NCS color range and others.

Technical data

Consumption standard for full spalling 150-200 ml/m2, depending on the type of the surface and way of application.
Thinner Water. It is allowed to dilute it maximum 10% of the total weight.
Application Apply with a brush, a roller or a spraying gun.
Drying period (23 °С, 50% RH) < 2 hour. Drying period increases if the temperature is getting down and relative air humidity is increasing.
Solids content (DSTU ISO 3251) About 44-45 %, depending on the color.
The degree of milling (SSU ISO 1524) About 5 µm
Density (DSTU ISO 2811-1) About 1.19-1.2 g/сm3, depending on the color
Hardness (DSTU ISO 1522) About 80 sec.
Impact resistance (DSTU ISO 6272-2) 50
Warranty period 24 months from the date of manufacturing
(at the temperature from +5 °С till +35 °С)
Packaging 0,9 l, 3 l, 10 l




yellow brown
red brown

Application instruction

1. Preliminary preparation

The surface under application shall be dry. Сlean the surface from dust, dirt, loose coatings, oil, grease and other dirt thoroughly. Defected surfaces (holes, rends, cracks) shall be filled with Putty for wood ТМ Farbex.

After dry surface shall be polished and removed from the dust.

The mineral absorbing surfaces shall be undercoated with Deep-penetrating waterborne acrylic primer “SuperBase” TM Farbex.

Wooden surfaces shall be undercoated with Acrylic wood primer TM Maxima.

2. Application

Stir the enamel thoroughly before use. The application shall be performed at the temperature of air and surface from + 10 °С till + 30 °С and maximal relative air humidity 80%.

The next layer shall be applied not earlier, than in 4 hours. 

The applied surface is ready for use after 2 days.  The final hardening of the surface and the acquisition of its properties occurs 2 weeks after the coating.

3. Tool cleaning

Clean tools with water after application.


Acrylic wood & concrete enamel - ЖК «Затишний квартал» POLYSAN
ЖК «Затишний квартал»

Забарвлення сходів проводилося акриловою емаллю для дерев'яних і бетонних підлог Maxima. Емаль призначена для фарбування …

Acrylic enamels Maxima
Acrylic enamels



Flow calculator

Consumption standard for full spalling

When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)

Paint consumption may vary depending on dilution and uniformity of application of the paint.