It creates wearproof coating, which is resistant to weather effects, water, salt, temperature fluctuation (heat, frost) and industrial oils. It dries quickly. It can be used together with glass microspheres, which give the coating light-reflecting properties.
Road marking paint is intended for application of marking on the roadway of vehicle roads, highways, roadways, asphalt, curbs and also concrete surfaces
|Consumption standard of 1 layer||0,6-1 kg/m2|
|Thinner||ethyl aсetate, buthyl acetate, 647 or 646|
|Application||A brush, a roller, a spraying gun, special machinery.|
|Drying period (23 °С, 50% RH)||15 minutes (if wet film is 300 - 500 micron thick).|
|Solids content (DSTU ISO 3251)||ab. 75%|
|Density (DSTU ISO 2811-1)||1,5-1,55 g/sm3|
|Warranty period||12 months|
The surface before application shall be dry, clean (without dust, sand, oil and other dirt), without pits and deformations.
Stir the paint thoroughly before use. If necessary dilute it with a thinner.
Apply the paint in a single color. The recommended thickness of wet film is less than 500 micron.
The temperature of the road, on what the paint is applied, shall be from +5 °С till +45 °С. It is not allowed to perform the application under direct sunlight, strong wind, precipitations and if the humidity of the air and road is significant.
Clean tools with a thinner and then with warm water with detergents if necessary.
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.