Paint for trees and bushes Farbex | POLYSAN

Paint for trees and bushes Farbex

Paint for trees and bushes

Farbex

Paint for trees and bushes


Buy

Specification

  • it is resistant to weather and water effects
  • it prevents a tree from dying of frost.
  • finished coating can resist temperature changes from -40 °C to +40 °C

Sphere of application

It is intended for protective and decorative coating of boles and skeleton branch bottoms of fruit trees and decorative plants to improve their resistance to subzero temperatures, sun scalds, pest and for coating of wounds etc. 

Technical data


Consumption standard of 1 layer:
0,2 kg/m2
Diluent:
Water
Application:
A brush or a spraying gun
Drying period (23 °С, 50% RH):
_
Solids content (DSTU ISO 3251) :
about 52 %
Density (DSTU ISO 2811-1) :
about 1,4 g/sm3
Warranty period:
18 months from the date of manufacturing
(at the temperature from+5 °С till +35 °С)
Packaging:
1,4 kg, 4 kg, 7 kg (14 и 20 kg - if pre- ordered)

Color

white

Gloss

matt

Application instruction

Applying

Apply the paint in autumn (before leaf fall) and early spring at temperatures above +5 ° C and air humidity below 80%.

Stir thoroughly the paint before use.

Remove old, weakly held bark with a hard bristle brush before application. Apply paint with a brush or a spraying gun on the surface of the tree.

Cover tree wounds with undiluted paint in spring and summer periods.

The quantity of layers is 1-2.

The coating achieves its protective properties in 24 hours.

Do not apply the paint under direct sunlight, strong wind, frost and falls. After the coating is applied it shall not be affected by falls and sub-zero temperatures for 8 hours.

Tool cleaning

Clean tools after application with water. 

X

Flow calculator

Consumption standard of 1 layer
min
max

When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)

Paint consumption may vary depending on dilution and uniformity of application of the paint.