Specification
- it has good adhesion
- it creates strong, elastic, and transparent gluing seams
Sphere of application
It is intended for strong gluing of wood, woodchip boards, MDF, paper, carton, leather and clothes. It is also used as an additive to cement mortar when it is intended for stoneware tile application.
Technical data
| Thinner | Water. The glue is ready to use and it doesn't need diluting. |
| Application | With a brush or a roller |
| Drying period (23 °С, 50% RH) | Does not exceed 1 hour in the case of gluing cardboard and paper; 6-12 hours, in the case of gluing vinyl wallpaper and other similar materials; operation load of wood products is possible after about 12 hours; maximum bond strength is reached after 24 hours. Drying time increases with decreasing temperature and increasing relative humidity, and also depends on the type of bonded surfaces. |
| Solids content (DSTU ISO 3251) | about. 19 % |
| Density (DSTU ISO 2811-1) | about 1,0 g/сm3 |
| Warranty period | 12 months, (at the temperature fromт + 5 °С till + 35 °С) |
| Packaging | 1 kg, 2,5 kg, 4,8 kg, 9 kg |
Color
white
Application instruction
1. Surface preparation
The surface shall be dry and clean thoroughly from dust, grease and other dirt.
2. Using
The glue shall be stirred thoroughly before use. Apply the glue with a brush or a roller with a maximal layer of 1 mm on one of the surfaces, which are going to be glued. After the glue is applied, the surfaces shall be combined and pressed. In case of light load on the glued surfaces, it is enough to apply the glue in the center and on the edges.
PVA glue DekArt
PVA glueповністю
X