Specification
Plaster allows you to imitate natural coatings: stone, marble, concrete, cement effects, as well as create various relief structures. Hides minor surface irregularities, is vapor-permeable.
Sphere of application
For interior work. Intended for high-quality decoration of mineral substrates (cement and cement-lime plaster, putty, gypsum, brick, concrete) in residential and office premises, as well as shops, restaurants, and bars.
Tinting
The plaster is colored manually using the pigment concentrate "Farbex Color", other water-based coloring pastes or by machine. It is not recommended to color wax. The adhesive primer "Quartz Primer" TM "Maxima Decor" must be colored in a color close to the material.
It is recommended to use products from one batch to avoid the differences in shades of color.
Modifications in the technical properties of products are allowed after tinting.
Content
Technical data
| Thinner | Water. It is allowed to dilute it max. 10% of the total weight of the product. |
| Consumption standard of 1 layer | 0,5-0,8 kg/m2 , depending on the technique of application and quantity of coats. |
| Drying period (20 °С, 60% RH) | 24 hours. Drying period increases if the temperature gets down and relative air humidity icreases. Complete hardening of the coating is achieved in 28 days! |
| Application | Apply with a trowel or a stainless spatula. |
| Density (DSTU ISO 2811-1) | ≈ 1,69 g/сm3 |
| Particle size | max 200 mkm |
| Solids content (DSTU ISO 3251) | 74±2 % |
| Warranty period | 24 months, (at the temperature from +5 °С till +35 °С) |
| Packaging | 15 kg |
Application instruction
1. Surface preparation
The surface must be strong, dry, and free of dust, loose coatings, chalk, limescale, efflorescence, grease, and other contaminants.
2. Priming
It is recommended to treat the surface with a deep penetration primer TM «Maxima» or TM «Farbex». Apply adhesive primer with quartz filler «Quartz Primer» TM «Maxima Decor» to the prepared surface, wait for it to dry.
3. Applying
Mix the plaster before use. Apply the first layer of material, evenly distributing the plaster over the surface. After the first layer has dried, apply the second layer in separate strokes, leaving gaps on a flat surface. Then, as it dries, smooth the surface with a spatula. This product can be applied using various techniques to achieve different effects. To improve performance and give an individual decorative look, use waxes "Cera" and "Cera Frontale" TM "Maxima Decor".
The drying time for a single coat is 24 hours. The plaster dries to the touch in 4 hours. Do not apply the next coat until at least 24 hours have passed. Drying time increases with lower temperatures, higher relative humidity, and increased plaster application rate (layer thickness). After application, the surface must not be exposed to moisture or mechanical stress for 24 hours. The surface is fully dry after 28 days.
Work should be carried out at air and working surface temperatures from + 10 °C to + 30 °C and air humidity not exceeding 80%. Do not mix with other materials and organic solvents.
4. Tool cleaning
Clean tools with water after application. Do not let them dry. The dry product shall be removed from the tools in a mechanical way.
Flow calculator
Consumption standard of 1 layer
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.