Farbex
Wet Rooms
Paint for wet spaces
Specification
It creates a strong, wearproof and water-repelled matt coating that completely allows surfaces "to breathe". It is resistant to repeated washing (resistance to wet abrasion - 2nd class according to DSTU EN 13300). It is easy to apply. It does not run and does not spray during application.
Sphere of application
It is intended for interior coating of all mineral (mortar and lime-mortar plaster, finishing plaster, brick, concrete) ), gypsum and wooden surfaces, wallpaper and fiberglass. It is recommended for coating of walls and ceilings in wet spaces with high exploitation load: bathrooms, kitchens, living, administrative spaces, medical, infant and educational establishments, spaces of catering and industrial enterprises.
Tinting
It can be tinted manually with Pigment Concentrate Farbex Color, other waterborne coloring pastes or with a coloring machine acc. to NCS color range and others.
Content
Technical data
| Consumption standard of 1 layer | 125-150 g/m2. Depending on the way of application and type of surface. |
| Thinner | Water. It is allowed to dilute it max. 10% of the total weight of the product. |
| Application | It is applied with a roller, a brush or a spraying gun. |
| Drying period (23 °С, 50% RH) | max. 1 hour. Drying period increases if the temperature is getting down and air humidity is increasing. |
| Solids content (DSTU ISO 3251) |
60±2 % |
| Density (DSTU ISO 2811-1) | ≈ 1,54 g/сm3 |
| Gloss (DSTU ISO 2813) | max. 5 GU at 85°, (dead matt, TSS U EN 13300) |
| The degree of milling (SSU ISO 1524) | max. 30 microns, (fine-grained, TSS U EN 13300) |
| Contrast ratio of dry film (ISO 6504-3) | 98,5 - 99 %, 2 class of hiding power (acc. to DSTU EN 13300) |
| Wet-scrub resistance, microns (DSTU ISO 11998) | about 20 (after 200 cycles) |
| Wet-scrub resistance class (DSTU EN 13300) | 2 |
| VOC content (ISO 11890) | < 15 g/l |
| Warranty period | 24 months from the date of manufacturing (at the temperature from+5 °С till +35 °С) |
| Packaging | 1,4 kg, 4,2 kg, 7 kg, 14 kg |
Gloss
Color
Application instruction
-
1. Surface preparation
Non-coated surface: Clean it from fragile parts till hard base surface. Remove dust, oil, grease and other dirt.
Previously coated surface: Clean thoroughly the surface from old loose coats (peeled paint or varnish coats) in mechanical (with a wire brush or scraper), thermal (with a hot air dryer, infrared radiation) or chemical (with paint removing products) ways. Chalk and lime-chalk whitewash coats shall be removed till hard surface in a mechanical way. The surface shall be clean of different kinds of dirt. Surfaces, previously coated with alkyd or oil enamel, shall be sandpapered. After that, the surface is treated as an uncoated surface.
Non-significant defects of the mineral surface shall be corrected with Finishing Putty TM Farbex. After that sandpaper corrected areas.
It is recommended to treat the surface with Antiseptic product TM Farbex for protection against mould and fungi.
2. Priming
Previously treated wooden surfaces need no undercoating.
Previously untreated absorbing mineral surfaces shall be undercoated with acrylic deep-penetrating primer TM Farbex.
Previously untreated wooden surfaces shall be undercoated with wood-protective acrylic primer TM Maxima.
3. Applying of finishing layer
Stir the primer thoroughly before use. The temperature of the air and the surface under application shall be from +5 °С to +35 °С and relative air humidity less than 80%. Apply the paint in 1-2 coats with a brush, roller or a spraying gun.
Apply the next coats in 1-2 hours depending on the base surface.
4. Tool cleaning
Clean tools after application with water. Do not let them dry. Remove mechanically spots of dry paint.
Tips
Як пофарбувати старі шпалери
Якщо перед фарбуванням стіни потребують ретельної вигонки та шліфування до ідеально рівної поверхні, то перед наклеюванням шпалер їх можна підготувати швидше. Недоліки поверхні усуваються за рахунок рельєфу полотна. Сучасні шпалери прості у використанні, пропонують широкий вибір текстур і візерунків. При …
Як самостійно пофарбувати стіни?
Новий колір стін може кардинально змінити настрій кімнати і загальну атмосферу інтер’єру. В цій статті ви дізнаєтесь як пофарбувати стіни самостійно, щоб оновити загальний вигляд будь-якого приміщення. Підготовка стін Фарбувати шпалери можна лише ті, які мають позначку «під фарбування». У …
How to coat a ceiling without problems?
The fact is that coating of a room with waterborne paints shall be started from the ceiling. There is certain sequence of work you should keep: At the beginning, we must prepare the surface:: 1. Cleaning It is necessary to …
Flow calculator
Consumption standard of 1 layer
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.