It is used for protective treatment of walls, doors, window frames, mooring berths, terraces and other new or clean from old paint wooden surfaces while conducting outdoor and indoor works. It is recommended as base cover before applying varnishes and alkyd based wood protectives TM "Maxima".
|Consumption standard of 1 layer||sawed wood - 125-250 ml/sq.m,
planed wood -80-125ml/sq.m
|Solvent||Оdorless solvent ТМ Maxima.|
|Application||Apply with a brush, a roller or a spraying gun.|
|Drying period (23 °С, 50% RH)||2 hours.|
(DSTU ISO 3251)
|аbout 11 %|
|Density (DSTU ISO 2811-1)||аbout 0,82 g/сm3|
|VOC content (ISO 11890)||-|
|Warranty period||36 months|
|Packaging||0,75 l, 2,5 l, 10 l, 20 l|
The treated surfaces shall be dry (humidity less than 20%) and have no fungal infections (fungi, blue stain, rot, mould).
Remove resin in the areas of knots in a mechanical way or with a solvent.
Existing old coating on the surfaces (paint or wood protective product) shall be completely removed in mechanical (a scraper, a wire brush), thermal (a hot air drier, infrared radiation) or chemical (paint removing products) way.
Avoid such ways of cleaning, which can damage the timber (for example sand blast machine).
Defected surfaces (holes, rends, cracks) shall be filled with Putty for wood ТМ Farbex.
Polish the surface and remove abrasive dust after that.
Stir the primer thoroughly before use. It is ready to use.
Apply the primer in 1-2 layers and treat the edges of the wooden surface thoroughly for a maximum protective effect.
Perform application works at the temperature of air and the surface from +10 ºС till +35 ºС and relative air humidity less than 80%. Do not apply the primer under direct sunlight, strong wind and precipitations. The undercoated surface shall not be affected with the precipitations till the finishing coat is applied.
Apply subsequent layers in 2 hours after the last coating. An undercoating of horizontal surfaces and higher consumption of the primer can increase the drying period.
Clean tools with a solvent after application. Dry primer may be removed only mechanically.
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.