Maxima
Acrylic wood-protective primer
Specification
It does not change the wood color. It penetrates deeply into the wood fibers. It effectively protects wood against pests and fungi and dries quickly. It has high adhesive property with bases. It is applied on a non-coated surface or surface, cleaned from old paint coating. The primer is ready to use and does not need dilution with water.
Sphere of application
It is intended for undercoating of different kinds of wood, MDF, fiberboards, wood chipboards, wooden panels, new or cleaned from old paint materials and wooden surfaces (walls and ceilings, doors, window frames, furniture, boat landings, terraces, etc.) before coating with water-based materials. For interior and exterior use.
Content
Technical data
| Consumption standard of 1 layer | 80-125 ml/m2, depending on kind of wood and the quality of timber, as well as on way of application. |
| Thinner | Water |
| Application | Apply with a brush, a roller or a spraying gun. |
| Drying period (23 °С, 50% RH) | 1 hour. Drying period increases if the temperature is getting down and relative air humidity is increasing. |
| Solids content (DSTU ISO 3251) |
16±1 % |
| Density (DSTU ISO 2811-1) | ≈ 1g/сm3 |
| VOC content (ISO 11890) | < 15 g/l |
| Warranty period | 36 months from the date of manufacturing (at the temperature from +5 °С till +35 °С) |
| Packaging | 0,75 l |
Color
Application instruction
-
1. Preliminary preparation
The surface shall be dry (maximum humidity is 20%), cleaned thoroughly from dirt, grease, dust, bluestone, rot, before application. Old paint coatings and darkened layers of wood shall be removed with sandpaper, wire brush, scraper. Then remove the dust.
2. Application
Stir the primer before use thoroughly. The primer is ready to use and does not need dilution with water. Apply it with a brush, a roller or a spraying gun. Edges of the wooden surface shall be treated with special thoroughness. The temperature of the air and the surface under application shall be from +10 °С to +30 °С and relative air humidity no more than 80%. The drying period increases if the temperature is getting down and relative air humidity is increasing.
Do not undercoat under direct sunlight, strong wind, frost and atmospheric precipitation. After the coating is applied it shall not be affected by atmospheric precipitation and sub-zero temperatures before finishing coating.
Subsequent work shall be carried out no earlier than 4 hours after the application of the last primer layer.
3. Tool cleaning
Clean tools with water after application thoroughly.
Use with this product
Tips
What Coating is Suitable for Interior Wooden Doors and MDF
Wooden interior doors have always been and remain popular due to the natural beauty of timber and the exploitative traits of this material. It has good sound and heat insulation. Wood is reliable, practical and durable. However, due to the …
Гумова фарба для стін
Поява гумової фарби докорінно змінила сприйняття споживачів про властивості і застосування фарби. Вона за короткий час завоювала любов споживачів своєю універсальністю і характеристиками. І хоч гумова фарба підходить для різних типів поверхні, у цій статті пропонуємо детальніше розглянути, чому варто …
Як самостійно пофарбувати фасад?
Хочете оновити зовнішній вигляд будинку, але не знаєте з чого почати? Користуйтесь порадами із цієї статті, щоб отримати результат, яким ви будете задоволені. Вибір фарби Робота по оновленню фасаду починається із вибору якісної фарби, яка забезпечить гарний зовнішній вигляд будинку …
Primer for wood Maxima
Primer for woodповністю
Flow calculator
Consumption standard of 1 layer
When calculating the area to be painted, you need to subtract the area that will not be painted. (windows, doors, etc.)
Paint consumption may vary depending on dilution and uniformity of application of the paint.